|
|
|
Pulse shaping filter program that finds the pole-zero locations of a transfer function, H(s), for a matched filter. H(s) equals a -desired- signal (Yout) divided by a given input signal (Yin). Both Yout and Yin are functions of frequency.
Group delay may also be calculated to compliment a given data set, thus, providing a flat group delay. Minimizing Intersymbol Interference in a read/write channel for disc drives by shaping and slimming an isolated readback pulse was the main objective for writing this program.
For more info, see Kost, R. and P. Brubaker; 'Arbitrary equalization with simple LC structures'; IEEE Transactions on Magnetics, Nov. 1981, pp 3346-3348 or visit http://www.digitalcalculus.com/page/785704.
This is a Fortran Calculus demo application.
|
|
|
fat to fit program
fit print
see fit
free Wii Fit
auto fit
-------------------------
|
|
Pulse shaping filter program that finds the pole-zero locations of a transfer function, H(s), for a matched filter. H(s) equals a -desired- signal (Yout) divided by a given input signal (Yin). Both Yout and Yin are functions of frequency.
Group delay may also be calculated to compliment a given data set, thus, providing a flat group delay. Minimizing Intersymbol Interference in a read/write channel for disc drives by shaping and slimming an isolated readback pulse was the main objective for writing this program.
For more info, see Kost, R. and P. Brubaker; 'Arbitrary equalization with simple LC structures'; IEEE Transactions on Magnetics, Nov. 1981, pp 3346-3348 or visit http://www.digitalcalculus.com/demo/matched-filter.html .
Another improved productivity example do to using Calculus (level) programming.
Match n Freq: http://www.digitalCalculus.com/download/m-freq-install.exe
|
|
The calculation is intended for geometrical design and strength check of force couplings of shafts with hubs with a
cylindrical contact area (Interference fit, clamping connection). The application provides solutions for the following
tasks:
- Design of force fits, possibly shrink fits.
- Design of clamping connections with separated, or one-side cut hub.
- Strength check of designed couplings.
- Check of interference fit strained by additional radial force with bending moment.
- Check of interference fit working at specific service temperature.
The calculation is based on data, procedures and algorithms from specialized literature and standards ANSI, ISO,
DIN and others. List of standards: ANSI B4.1, ISO 286, DIN 7190.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others.
MITCalc - Force shaft connection: http://www.mitcalc.com/download/MITCalcShaftconF01.exe
|
|
|
|