|
|
|
The calculation is designed for a geometrical design and strength check of a prestressed bolt connection, loaded
by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts.
Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the following
main tasks:
- Automatic design of a connection bolt of standard design.
- Calculation and check of connections fitted with special shanks.
- Design and calculation of necessary mounting prestressing of the connection and fastening torque.
- Calculation of force conditions of a loaded connection.
- Static and dynamic strength check.
- The application includes a table of commonly used materials of bolts according to ISO, SAE and ASTM, and a
selection of materials of the connected parts according to AISI/SAE, DIN, BS, AF and others.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, TurboCAD…)
The calculations use data, procedures, algorithms and data from specialized literature and standards ANSI, ISO,
DIN.
Used standards: ANSI B1.1, ANSI 273, ANSI B18.2.1, ANSI B18.2.2, ANSI B18.3, ANSI B18.6.2, ANSI B18.6.3,
ANSI B18.22.1, ISO 273, ISO 1207, ISO 4016, ISO 4032, ISO 4035, ISO 4762, ISO 8738, VDI 2230.
This module is a part of MITCalc - Mechanical and Technical Calculation Package for gear, belt and chain drives,
springs, beam, shaft, bolt connection, shaft connection, tolerances and many others
|
|
|
ANSI B1.1
Narrow V-Belts ANSI/RMA IP-22
Traditional V-Belts ANSI/RMA IP-20
ANSI 273
ANSI/ASME B29.3
ANSI Common Lisp
ANSI Editor
ANSI B18.2.1
ANSI/NIST-ITL 1-2000
-------------------------
|
|
MITCalc - Bolted connection: http://www.mitcalc.com/download/MITCalcBoltCon01.exe
|
|
MITCalc - Multi pulley calculation: http://www.mitcalc.com/download/MITCalcMPulley01.exe
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels
(max. 15). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and solves the
following main tasks:
- Calculation of the necessary length of the belt (chain) using known positions and diameters of sprocket wheels
- Achieving the desired (table) length of the belt / chain using a change in the position of the selected sprocket
wheel.
- Calculation of geometry (angles of wrapping, numbers of teeth in engagement, axis distances, etc.)
- Calculation of the radial force acting on the sprocket wheel axis.
- Support of 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, TurboCAD…)This module is a part of MITCalc -
Mechanical and Technical Calculation Package for gear, belt and chain drives, springs, beam, shaft, bolt
connection, shaft connection, tolerances and many others |
|
|
|